Wireless system
Flowtrecs Android BT
The standard Flowtrecs Android BT panel is not waterproof and must be installed inside an enclosed boat at a dry helm. The 7″ display supports 1, 2 or 4 sensors.
- Not waterproof
- Enclosed boats only
- 7″ / 1000 nits
- 1 / 2 / 4 sensors
Choose the configuration that matches your installation in the store.
Choose a store variant
01
Product overview
The standard Flowtrecs Android BT uses a large, bright 7-inch touchscreen and a wireless Bluetooth connection to the sensor module. The panel is not waterproof: install it only inside an enclosed boat, in a dry cabin or at a fully protected indoor helm. The system supports configurations with 1, 2 or 4 FS-40 sensors.
02
Key features
Supports 1, 2 or 4-sensor variants: 1 for one petrol engine, 2 for two petrol engines or one diesel engine, and 4 for two diesel engines.
The panel is not waterproof and requires a dry mounting position inside an enclosed boat.
Displays consumption, fuel economy in km/l, RPM, speed, voltage, trip statistics and MOB.
A 1000-nit screen improves readability in bright surroundings.
GPS supports maps and navigation data.
Bluetooth reduces the wiring needed between the measuring module and display.
The sensor kit is factory-calibrated and configured for the ordered version. No manual calibration or selection of sensor type, range or count is needed for first use.
The display supplied with the kit is already paired with the Bluetooth module.
03
Technical data
- Sensor support
- 1, 2 or 4 FS-40 sensors
- 1 sensor
- 1 petrol engine
- 2 sensors
- 2 petrol engines or 1 diesel engine (supply + return)
- 4 sensors
- 2 diesel engines (2 sensors per engine)
- Display
- 7″ touchscreen, 1000 nits
- System
- Android 6.0
- Connection
- Bluetooth between module and panel
- Navigation
- GPS with map and app support
- Water protection
- None — panel is not waterproof; enclosed boat and dry interior only
- Power
- 12–16 V DC, approx. 800 mA
- Operating temperature
- 0–45 °C
- Measurement accuracy
- Approx. 5 % error. On diesel systems, relative deviations in net consumption may be greater at low load, especially at idle.
04
What is included
- Seven-inch Android panel.
- Bluetooth module and 1, 2 or 4 FS-40 sensors, depending on the variant.
- Power and connection components for the variant.
05
Connecting the RPM signal
Reading RPM from the ignition signal of a carbureted petrol engine requires an additional Tacho Pulse Limiter. Two versions are available: IN — for inboard engines and OUT — for outboard engines.
For fuel-injected engines (EFI/DFI), a limiter is typically not needed when using a suitable electronic tachometer output.
The limiter is used only for RPM readings and is not required to measure fuel consumption.
Diesel: an additional Hall sensor may be required if the engine does not provide a suitable electronic RPM signal.
Flowtrecs / 08
Other Flowtrecs products
Compare the remaining devices and match the system to the engine type and required sensor count.
System selection
Match the sensor to your engine.
Provide the engine model and count, fuel type, return-line layout and, if known, pump flow. We will help select the right model, sensor count and range.
Email us — info@flowtrecs.com